Skip to content

Decorative Vase Set / Laser-cut design

Nine vases. Different profiles.

SVG, DXF and CDR files for nine decorative wooden vase designs. Choose straight, curved or angular profiles and build the open rib structures from 3 mm or 1/8-inch plywood.

Get the filesExplore the model

Digital design · SVG + DXF + CDR
No physical model or materials are shipped.

Visualization of nine decorative wooden vase designs with open ribs and straight, curved or angular profiles
AI-assisted model visualization based on 21CNCStudio design renders.

01 /The design

Nine profiles built from wooden ribs.

The set combines narrow straight forms, wide-waisted profiles and rounded bodies. Original renders show the group from above and closer views of curved and straight-sided designs.

Files are prepared for 3 mm and 1/8-inch plywood. Check the current dimensions of your chosen profile before planning its place on a shelf or arranging the cut layout.

Nine vase designs

Compare the different sizes and shapes before choosing a build.

Open rib construction

Vertical ribs and supports define the decorative profiles.

Two material versions

Use the supplied version that matches your measured plywood.

Views & details

Original design renders from different angles. Select an image for a larger view.

High render of the nine decorative wooden vase designs showing open rib structures in different shapes.
Original 21CNCStudio design render. High render of the nine decorative wooden vase designs showing open rib structures in different shapes.
Render of a tall curved decorative vase with open wooden ribs.
Original 21CNCStudio design render. Render of a tall curved decorative vase with open wooden ribs.
Render of three tall straight-sided decorative wooden vase designs.
Original 21CNCStudio design render. Render of three tall straight-sided decorative wooden vase designs.

02 /At your workbench

Choose your material.Make it fit.

01 /

Choose a profile.

Compare the nine designs and check the dimensions in the current files before preparing sheets.

02 /

Measure and test.

Use the version matching your actual plywood thickness and test the fitted connections.

03 /

Assemble the ribs.

Identify the matching ribs and supports for your chosen vase, then dry-fit the structure before fixing it together.

Plan this build.

Identify the parts for the profile you want to make. Measure the plywood, test fitted connections and dry-fit the ribs and supports before fixing the vase together.

At the 3 mm material scale, no individual part exceeds 290 mm. This refers to one part, not the assembled model or the whole cutting layout. Rescaling changes that limit.

Before you start.

Set
Nine decorative vase designs
Vector formats
SVG, DXF, CDR
Material versions
3 mm / 1/8 inch plywood
Are these designs intended to hold water?

The files are for decorative wooden vase structures. Water-holding use or an insert is not specified; check the design and material against the display you intend to make.

What do I receive?

SVG, DXF and CDR cutting designs for nine decorative wooden vases, with versions for 3 mm and 1/8-inch plywood. An assembly guide is not confirmed. No physical vases or material are supplied.

Can I change the scale?

Scale every part equally. Slots and tabs change with the design, so the material thickness must change in the same proportion; the finished dimensions also change. Test the fit and kerf before cutting all the parts.

Can I use the design commercially?

Contact 21CNCStudio to discuss permission before commercial use. Do not redistribute the digital files without the author’s permission.

03 /From the studio to your workbench

Choose a vase to build.

View the Decorative Vase Set file package and its current terms on Etsy.

View files on EtsyDigital design files.
No physical model, material or hardware is shipped.
Back to laser cuttingDesigned by 21CNCStudio. Made by you.
MAKERLENS